HOME About Us Our Products Research & Development our projects customer list Contact Us Enquiry
Machine Makers R.S
Manufacturers & suppliers of innovative high precision wire processing machines
Globe
Stripping MachinesWire Stripping MachinesCable Stripping MachineStripping MachinesWire Stripping Machines
Machine Makers R.S


Company Video

Home » Our Product Range »Wire Cutting & Stripping machines

Wire Cutting & Stripping machines

We are the prominent manufacturer and supplier of Cutting & Stripping machines.These machines are available in many models including Wire Cutting Cum Stripping Machines, Wire cutting and stripping machines: Model-CTSS 33, High Speed Wire Cutting & Stripping machine 'RAE-Ser-1', High Speed Wire Cutting, Stripping & Slitting machine 'RAE-Ser-1+S' etc. These machines are fully automatic and feature excellent performance, better output and are economical.

Wire Cutting Cum Stripping Machines

Wire Cutting Cum Stripping Machines
M/s ‘machine makers r.s.’ Have developed and manufactured a range of ‘Automatic Wire Cutting cum Insulation stripping machines’.

Each one of them is an accurate and efficient machine to cut PVC coated electric wires and also to remove the insulation from both ends. That is to cut and strip wires from a bundle of wire, so as to make them ready for wiring and harnessing.

These machines are user-friendly, tabletop, fully automatic machines. They are incorporating the state of the art technology and are economic alternative to costly imported machines. And these machines can be run continuous unlike Cheaper Chinese machines. These machines can cut and strip single core, multi-strand PVC insulated electric wires. Partial as well as full stripping is possible.

A production rate of around 2500 wire pieces per hour can be achieved (Refer table on the next page). Smaller wires can be fed two at a time to get almost double productivity.

These machines are manufactured with high quality, robust, imported stepper or servo motors. Machines are supplied with V blades for cutting and stripping a range of wires.

These machines come with Microprocessor or PLC based controls. These controls are provided with adequate cooling fans. This is essential for hot Indian conditions in summer. Apart from standard control configuration, PC based control system giving a complete database solution with wire planner is also available, for some of these machines, at extra cost.

Machines require single-phase 220 V AC stable electric supply and a compressed air supply at 4-bar pressure.

Wires from 0.5 sq mm to 6 sq mm can be processed on model RAE-Ser-1.
Machine model CTSS 33 is suitable for wires from 0.5 sq mm to 2.5 sq mm.
For wires/battery cables from 8 sq mm to 50 sq mm, model RAE-Ser-11 can be used.
For wires from 0.5 to 16 sq.mm, Model RAE-Ser-2 is most suitable.

Some of these machines can be fitted with attachments for twisting and slitting at extra cost.


Special machines for specific customer needs can also be developed by m/s ‘machine makers r.s.’.

Specifications :

Voltage 220 V AC
Phase Single-Phase
Compressed Air Supply At 4-bar pressure

Yes! I am Interested





High Speed Wire Cutting & Stripping Machine ‘RAE-Ser-1’

 	
High Speed Wire Cutting & Stripping Machine 'RAE-Ser-1'
Feature
  • Machine for 2 wires at a time, of upto 6 mm2
  • High Speed machine with Servo Technology
  • Upto 2 mid-strippings possible (conditions apply)
  • Machine and Controls in a single housing
  • Machine controlled with PLC.
  • Touch panel display having easy to use graphic interface
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Machines for both side stripping.(Can also do single side stripping and also only cutting).

Performance Range

Style 100 mm 300 mm 500 mm 1000 mm 2500 mm
Cutting and both Side stripping 4000/hr (7200/hr) 3700/hr (6650/hr) 3300/hr (6000/hr) 2800/hr (5000/hr) 1800/hr (3250/hr)


* Speed for 0.5 sq mm multi-strand wires
* Speeds mentioned in bracket are with two wires at a time

Attachments:

Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)
Specifications :

Voltage Servo-stabilizer 2 KVA
Change over setting time 30 sec typically.
Machine Housing Machine housed in Industrial frame with Aluminium Profiles.
Mechanical system Rugged machine with precision mechanical system
Electronic system PLC and drives
Wire feed system 2 Servo motors with 4 feed rollers, variable speed
Cutting & Stripping system V blade pair with Servo motor, variable speed and PLC controlled strokes
Length Measurement system Directly by Servo motor control
Power 220V / 50 Hz, other options upon request
Compressed air 5 to 7 bar, 70 to100 psi, 40 lpm (less than 0.5 hp)
Dimensions 500mm X 620mm X 335mm(h)
Wire Cross section Model RAE-Ser-1: 0.5 to 6 mm2(Contact us for sizes outside this range)
Length Selection Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 25 meters
Accuracy +/- 0.2% (min. +/-1.5 mm)
End Stripping Upto 30 mm at both ends (subject to material friction) Partial as well as Complete stripping possibl
Middle Stripping Upto 2 windows max. (Conditions apply, In select models only)
Multiple Wire Processing Can process 2 wires at a time for Wires upto 6.0 Sq.mm. For rigid wires, the machine may get de-rate
Wire Types Single core with single or multiple strands / Flexible or rigid
Max. Outside Diameter 6 mm

Yes! I am Interested



Cutting Machines for Power Chords & Battery Cables CTO - 16

Cutting Machines for Power Chords & Battery Cables CTO - 16
Description :
M/s 'machine makers r.s.' have introduced a 'Power Cable Cutting machine' for cutting multi-core Power cables & battery cables. This is a specially developed High Speed High Accuracy machine for cutting of power cables, battery cables as well as single core wires. The machine can be used for processing flat cables, as well.

This power-packed machine ensures high production volumes and low manufacturing costs. With these machines, the cost of cable cutting is around 10 to 15 paisa per 100 cables. A stepper motor drive and an encoder feedback system ensure high accuracy in length. Machine being accurate, it saves copper and often the saving in copper cost is much more than the labour saving. Most importantly, this machine does not require any compressor, and can be operated with single-phase electric supply.

A combination of motor, vector drive delivers a very high cutting force. The machine's noise level is also quite low. This machine is tabletop, user-friendly, and automatic. Any operator can be trained within 5 minutes to operate it. Machine is available with Microprocessor controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty and other processing parameters. It comes with in-built production counter, which indicates the number of cuts taken. The standard machine (Model CTO 16) can is able to cut copper braided ropes of upto 11 mm diameter or battery cables of upto 50 sq mm. These machines can cut wires and cables of length from 5mm to 9meters. A special version for upto 25 meters is also available.

Depending upon the length, this machine can process around 1000-2200 pieces per hour. To get a proper speed and length, a wire pre-feeding arrangement such as de-reeler may be required. The same is not within the scope of this machine. The machine can also be hooked upto online cable / chord extrusion plant with the help of a dancer roller arrangement. This helps in avoiding in-process inventory and boosts productivity.

Features :
  • MICROPROCESSOR controlled machines with smart display.
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Compressor not required, Silent operation.

Production Speed* :

Machine 500 mm 1000 mm
CTO 16 1500 / Hr 1000 / Hr

Speed for 0.5 sq mm multi-strand wires.
Specifications :

Voltage servo-stabilizer 2KVA
Multiple Wire Processing Possible with special guide and blades in selective cases
Changeover setting time 30 sec to 5 minutes typically.
Mechanical system Rugged machine with precision mechanical system
Electronic system Separate electronic control microprocessor & encoder and drives
Wire feed system 1 stepping motor with 2 feed rollers, variable speed, encoder feedback
Cutting system Motor, clutch and gearbox system. Small but rugged press tool operated by motor, gear box and VFD
Length Measurement system Stepping motor control with encoder feedback
Power 220V / 50 Hz, other options upon request
Compressed air Not Required
Dimensions 500mm X 500mm X 435mm(h), approx
Wire Types & Cross section Model CTO 16: Single core flexible wires upto 50 mm2, Power chords (unarmoured) upto 14 mm O.D., Bra
Length Selection 5 mm to 9 meters, in steps of 1mm, Range can be extended to 25 meters You will require separate de-r
Accuracy +/- 0.3% (min. +/-2 mm)

Yes! I am Interested



Wire Cutting & Stripping Machine HSE-141

Wire Cutting & Stripping Machine HSE-141
Features :
  • Machine for 2 wires at a time, of upto1.5 mm2
  • High Speed machine
  • Upto 2 mid-marking (for middle strippings) possible
  • Machine and Controls in a single housing
  • Machine controlled with PLC.
  • Touch panel display having easy to use graphic interface
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Machines for both side stripping. (Can also do single side stripping and also only cutting).
  • "MICROPROCESSOR controlled machines with smart display.
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Compressor not required, Silent operation.

Production Speed* :

Style 100 mm 300 mm
Cutting and both Side stripping 3000 / hr (5700 / hr) 2500 / hr (4800 / hr)

Speed for 0.5 sq mm multi-strand wires.
Speeds mentioned in bracket are with two wires at a time.

Attatchment
Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)

Specifications :

Wire Cross section Model HSE-141: 0.2 to 1.5 mm2, (Contact us for sizes outside this range)
Length Selection Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 9 meters
Accuracy +/- 0.2% (min. +/-1.5 mm)
End Stripping Upto 15 mm at both ends (subject to material friction) Partial as well as Complete stripping possibl
Middle Stripping Upto 2 windows marking. (Conditions apply, In select models only)
Multiple Wire Processing Can process 2 wires at a time for Wires upto 1.5 Sq.mm. For rigid wires, the machine may get de-rate
Wire Types Single core with single or multiple strands / Flexible or rigid
Max. Outside Diameter 4 mm
Changeover setting time 30 sec typically.
Machine Housing Machine housed in Industrial sheet steel fabrication.
Mechanical system Rugged machine with precision mechanical system
Electronic system PLC and drives
Wire feed system 2 motors with 4 feed rollers, variable speed
Cutting & Stripping system Directly by Stepper / Servo motor control
Power 220V / 50 Hz, other options upon request
Compressed air 5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp)
Machine size Table top machine

Yes! I am Interested



Wire Cutting & Stripping Machine HSE-142

Wire Cutting & Stripping Machine HSE-142
Features :
  • Machine controlled with PLC.
  • Touch panel display having easy to use graphic interface
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Machines for both side stripping. (Can also do single side stripping and also only cutting).
  • Machine for 0 to 4 sq.mm – two wire at a time, 6 sq.mm – one wire at a time
  • High Speed machine
  • Upto 2 mid-marking (for middle strippings) possible
  • Machine and Controls in a single housing

Production Speed* :

Style 100 mm 300 mm
Cutting and both Side stripping 4500 / hr (8000 / hr) 4000 / hr (7000 / hr)

Speed for 0.5 sq mm multi-strand wires.
Speeds mentioned in bracket are with two wires at a time.

Attatchment
Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)

Specifications :

Voltage Servo-stabilizer 2 KVA
Compressed air 5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp)
Machine size Table top machine
Wire Cross section Model HSE-142: 0.2 to 4 mm2, (Contact us for sizes outside this range)
Length Selection Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 9 meters
Accuracy +/- 0.2% (min. +/-1.5 mm)
End Stripping Upto 15 mm at both ends (subject to material friction) Partial as well as Complete stripping possibl
Middle Stripping Upto 2 windows marking. (Conditions apply, In select models only)
Multiple Wire Processing Can process 2 wires at a time for Wires upto 4 Sq.mm. For rigid wires, the machine may get de-rated.
Wire Types Single core with single or multiple strands / Flexible or rigid
Max. Outside Diameter 4 mm
Changeover setting time 30 sec typically.
Machine Housing Machine housed in Industrial sheet steel fabrication.
Mechanical system Rugged machine with precision mechanical system
Electronic system PLC and drives
Wire feed system 2 motors with 4 feed rollers, variable speed
Cutting & Stripping system V blade pair with motor, variable speed and PLC controlled strokes
Length Measurement system Directly by a servo Stabilizer is a must / Servo motor control
Power 220V / 50 Hz, other options upon request

Yes! I am Interested



Cutting & Thermal Stripping Machine DMD - 01

Cutting & Thermal Stripping Machine DMD - 01
Description :
M/s 'machine makers r.s.' Have developed and manufactured a special machine for cutting and thermal stripping of Teflon and DMD insulated wires. This is probably the "World's first ever" fully automatic machine developed for thermal stripping. Thermal stripping had always been a slow and cumbersome process. In addition the operator is exposed to the fumes coming out of the DMD at the time of thermal stripping. We have automated the same process by which it has become faster, simpler and safer and off-course accurate as well.

The machine cuts the wires to desired length and also strips the insulation from both ends. The stripped out insulation will have to be taken out manually by the operator at the time of wiring or crimping.

This machine has a user friendly touch screen interface. Here you can set the length, stripping length of the wire and also the production quantity, batch size etc. This machine is a user-friendly, tabletop, fully automatic machines. It incorporates the state of the art technology and is economic, rapid & safe alternative to manual process. And the machine can be run continuously. This machine is manufactured with high quality, robust, stepper or servo motors. & comes with PLC controls and it is operated using a short Touch panel. Machines require single-phase 220 V AC stable electric supply and a compressed air supply at 4-6 bar pressure.

Machine comes with “high speed steel” (HSS) blades for cutting and special nichrome blades for stripping.

Wires from 0.5 sq mm to 2.5 sq mm can be processed One can comfortably produce 12-15 wires per minute. Special machines for specific customer needs can also be developed by m/s 'machine makers r.s.'.

Features :
  • MICROPROCESSOR controlled machines with smart Touch Screen.
  • Fully automatic machine. Setting is completely digitized and mostly automatic.
  • Machines for both side stripping.(Can also do single side stripping and also only cutting)


Specifications :

Production Speed Approx 15-20 wires per minutes
Power 220V / 50 Hz, other options upon request
Compressed air 5 to 7 bar, 70 to100 psi, 100 lpm (less than 1 hp)
Voltage servo-stabilizer 2KVA
Dimensions Main Unit : 400mm X 300mm X 450mm(h)
Wire Cross section 0.5 to 2.5 mm2 (Contact us for sizes outside this range)
Length Selection Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 25 meters
Stripping Accuracy +/- 0.5 mm
Length Accuracy +/- 0.2% of length(min. +/-1.5 mm)
End Stripping Upto 15 mm at both ends (subject to material friction) Only Partial stripping possible
Wire Types Single core wires with DMD and Teflon insulation
Changeover setting time 30 sec typically.
Max. Outside Diameter 6 mm
Machine Housing Single housing for machine & Controls
Mechanical system Rugged machine with precision mechanical system
Electronic system Separate control panel with PLC and drives
Wire feed system 1 stepping motors with 2 feed rollers, variable speed
Cutting System Pneumatically operated cutter with HSS blades
Stripping system Pneumatically operated rotary head with nichrome blades.
Length Measurement system Directly by stepping motor control

Yes! I am Interested



HOME About Us Our Products Research & Development our projects Company Video Contact Us Enquiry
Member IndiaMART © Machine Makers R.S.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?