M/s machine makers R.S. have developed and
manufactured Cutting and Stripping machine (Model RAE-Ser 11) for
Battery Cables. The machine is suitable for cables upto 50 sq mm
cross-sections. It cuts the cable to accurate length and also
removes insulation from both ends.
RAE-Ser 11 uses a specially developed belt feeding system. It takes
care of heavy frictional forces required for stripping thick cables.
This machine is tabletop, user-friendly, and automatic. It uses
different sets of blades for various sizes of cables. All other
setting is completely digital.
Machine is fitted with encoder to accurately measure the wire
It is available with Microprocessor controls as well as PC based
Controls. A simple and smart Touch Panel with attractive Graphics is
used for setting the length, target quantity, batch qty etc. It
comes with in-built production counter, which indicates the number
of cuts taken.
RAE-SER-11 comes with a unique grip cum pull mechanism so unlike
most imported machines it can cut & strip wires as small as 40
mm in length.
The RAE-Ser 11 machines can cut cables of length from 40 mm to
9meters. It can strip upto 35mm from either side. Depending upon the
length, the machine can process around 1200 wires per hour.
Some basic features of the machine will be as follows:
1) Wire length: 40 mm to 9 mtrs (in steps of 1 mm);
2) Insulation stripping: 5 to 35 mm
3) Machine will have cutting length tolerances as 0.3 % (but minimum
4) Tolerance on stripping length will be 0.5mm
5) The machine will be able to cut and strip at least 10 wires (of
length 2m, strip length 12 mm each) per minute. (That is at least
600 wires per hour, or at least 7200 wires per 12 hours)
The machine works on single-phase electric supply and 5 bar
Special machines for other specific customer needs can also be
developed by m/s machine makers r.s.
Salient Feature :
- Machine controlled with PLC.
Touch panel display having easy to use graphic interface
Fully automatic machine. Setting is completely digitized and mostly automatic.
Machines for both side stripping. (Can also do single side stripping and also only cutting).
|Wire Cross section
||Model RAE-Ser-11: 10 mm2 to 50 mm2 (Contact us for sizes outside this range)
||Around 600 -1500 wires per hour.
||Machine housed in Industrial frame with Aluminium Profiles.
||Rugged machine with precision mechanical system
||PLC and drives
|Wire feed system
||2 Servo motors with 4 feed rollers, variable speed, encoder feedback.
|Cutting & Stripping system
||V blade pair with Servo motor, variable speed and PLC controlled strokes
|Length Measurement system
||Directly by Servo motor control with encoder feedback for better accuracy.
||220V / 50 Hz, other options upon request
||5 to 7 bar, 70 to100 psi, 100 lpm (less than 1 hp)
||970mm X 770mm X 410mm(h)
||Standard range : 40 mm to 9 meters, in steps of 1mm; The range can be extended to get upto 25 meters
||+/- 0.2% (min. +/-1.5 mm)
||Upto 30 mm at both ends (subject to material friction) Partial as well as Complete stripping possibl
|Multiple Wire Processing
||Can process 10 mm2 to 50 mm2 for wire with copper strand diameter of 0.5 mm max. For wires with bigg
||Single core with single or multiple strands / Flexible or rigid
|Max. Outside Diameter
||14 mm (Conditions apply)
|Changeover setting time
||3 to 5 min typically.